How to Change Car Motor Oil and Filter: Do It Like a Pro!

As we all know, the oil is the lifeblood of the engine. It makes sure that the engine will be running smoothly and that it will not be easily prone to wear and tear. With the right oil, you can optimize the performance of your engine. That being said, it is important to keep the oil clean, which is why there will come a time when you need to have it changed. That being said, read on and we’ll let you know how to change car motor oil and filter the easy way!

How to Change Car Motor Oil and Filter

Step-by-Step Guide on How to Change Car Motor Oil and Filter

With basic supplies, a little time to spare, and a bit of patience, you can successfully accomplish the task on your own. Here are the simple steps that you have to follow.

  1. Jack your Car

The first thing that you have to do is to jack up your car to assume the right position, which will make it easy for you to work on the engine. Pull the car over on a place with an even surface. It should be bright and spacious for you to work with ease.

Before you proceed to the next step, you also have to leave the car idle for about ten minutes. This will provide you with enough time to allow the oil to cool.

  1. Drain the Engine Oil

Once the car is in a height and position where you can work safely, allow the oil to drain. To do this, you have to locate the oil pan. The location will depend on the model of the car that you have. In some cases, there is a splash guard that you have to remove first before you can find the oil pan. Place a container on the bottom to catch the oil from the engine. Make sure that it is completely drained before you proceed to the next step.

  1. Remove the Old Filter

After draining the oil, you now have to remove the oil filter. You will need to find a wrench with the suitable size. More often than not, a filter wrench will be handy. Depending on the car that you have, you might also need a nylon band, spring band, or coil spring wrench. You might need to exert more force if the filter is stuck.

To be safe, make sure that there is a drain pan and newspapers at the bottom. This will catch any oil coming out and will prevent a mess on the work area. Once the screws are loose, unthread it by hand and remove the filter.

  1. Change the Filter and the Oil

Once the filter has been removed, you can now replace it. Wipe off any excess oil first before installing the new filter. Screw the filter in place and tighten it using your hand. Check the instructions from the manufacturer if there are specific steps on how it should be placed.

Now that you have changed the filter, it is time to replace the oil. A funnel is necessary for transferring the new oil. Look for the oil cap that you have to remove before putting the new oil. You need to use a dipstick to know how much oil needs to be refilled. Avoid overfilling as this can cause a serious engine problem. Once you are done filling it with oil, close the cap and make sure that it is tight.

  1. Run the Engine

Once you are done replacing the filter and the oil, you can now start the engine. Turn it on for a few minutes, which is important for the circulation of the new oil. Make sure as well to check for leaks. If there are leaks, turn off the engine, allow it to cool down for a while, and tighten any loose part where the leak originates. You also have to look at the oil warning light in the dashboard to know that you have filled the oil at the right level.

Tips for Changing Car Motor Oil and Filter

How to Change Car Motor Oil and Filter

Before we end this post, allow us to give you some tips to make sure of the best outcomes and that you will be able to do it like a pro:

  • Find the right oil and filter that will be used as a replacement. See to it that the quality is unmatched, even if it means having to spend a little more. If you have oil that has been in the garage for years, avoid using it as it will no longer be effective. If you have a high-mileage car, you will need an oil that has been designed specifically for such.
  • Do not overfill the oil. Use a dipstick to know how much oil has already been filled and that you are not going over the recommended amount. Fill only until the top line of the dipstick. Overfilling can cause problems that will require costly engine repair.
  • You also need to document your change of the oil. Take note of the date, and more importantly, the mileage. This will make it easy to keep track and to know the next time that you need to change the oil.
  • Make sure that you get rid of the old oil properly. This is one thing that most car owners missed. Be a responsible person by looking for an oil recycling center within your community. The improper disposal of the oil can cause environmental problems.

Wrap Up

In sum, as discussed in this post about how to change car motor oil and filter, this is actually an easy task that won’t require too much effort and time on your end. You can save a lot by doing it on your own instead of turning to your local mechanic.

Related Article: Best 0w-20 Synthetic Oil

Leave a Comment